Skoda Octavia II 2004 Workshop Manual page 150

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
Draining
Note
Collect drained coolant in a clean container for proper disposal or
reuse.
WARNING
When opening the coolant expansion reservoir, hot steam or
hot coolant may escape. Cover the cap with a cloth and open
carefully.
– Open the cap of the coolant expansion reservoir.
– Remove noise insulation ⇒ Body Work ⇒ Rep. gr. 50 .
– Place a catch pan under the engine.
– Remove the coolant hose from the radiator; to do so pull the
retaining clip -arrow-.
– Remove engine cover
– Detach the rear coolant hose on the engine oil cooler -arrow-
and drain residual coolant.
Filling up
Note
Replace O-rings.
– Connect coolant hose at bottom of radiator -arrow-.
144
Rep. gr.19 - Cooling
⇒ page 13 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�