Parts Of The Cooling System Engine Side For Engines With Code Bkd, Azv - Skoda Octavia II 2004 Workshop Manual

1.2

Parts of the cooling system engine side for engines with code BKD, AZV

1 - Radiator for exhaust gas re‐
circulation
❑ Removing and installing
⇒ page 241
2 - to heat exchanger
❑ Coolant feed line
❑ Connection diagram for
coolant hoses
⇒ page 133
3 - Hose
❑ to flap of radiator for ex‐
haust gas recirculation
4 - 10 Nm
5 - The coolant pipe at the rear
6 - Retaining clip
❑ Check for secure seat‐
ing
7 - O-ring
❑ replace
8 - Coolant temperature send‐
er - G62-
❑ with coolant tempera‐
ture sender - G2-
9 - Hose
❑ to radiator for exhaust
gas recirculation
❑ Connection diagram for
coolant hoses
⇒ page 133
10 - Connection fitting
❑ at cylinder head
❑ with coolant temperature sender - G62-
11 - from heat exchanger
❑ Coolant return-flow line
❑ Connection diagram for coolant hoses
12 - 40 Nm
13 - Hose
❑ to cylinder head
14 - Hose
❑ to the tube at the rear
15 - Small distributor
16 - Hose
❑ to the distributors
17 - Hose
❑ To connection fitting at cylinder head
18 - Hose
❑ towards top radiator
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
⇒ page 133
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
1. Removing and installing parts of the cooling system
131