Connection Diagram For Exhaust Recirculation Vacuum Hoses For Engines With Code Bmm - Skoda Octavia II 2004 Workshop Manual

– Unscrew connection pipe for exhaust gas recirculation radiator
-arrows-.
– Unscrew screw -2- and hollow screw -3-.
– Rotate the turbocharger support 90° and pull it down and out
of the oil return line.
– Unbolt bracket -2- for diesel particle filter.
– Disconnect the vacuum line -1- and remove.
– Release screws -arrows- and remove radiator for exhaust gas
recirculation.
Installing
Installation occurs in reverse order to removal. Pay attention to
the following:
Note
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Replace the gaskets and the self-locking nuts.
♦
Secure all hose connections with corresponding hose clips.
♦
2.11 Connection diagram for exhaust recir‐
culation vacuum hoses for engines with
code BMM
Summary of components ⇒ page 186
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
2. Exhaust gas recirculation system
249