Skoda Octavia II 2004 Workshop Manual page 172

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
– Slide the spring -2- into the guide bore -arrow- and fit the cable
-1- of the closing flange on the cable -3- of the fuel delivery
unit.
Fuel delivery unit type two
• The spring -2- must be fastened to the retaining lugs -1- of the
closing flange.
– First of all guide the guide pipe -3- into the guide bore -4-.
– Then lower the closing flange in such a way that the guide pipe
-6- locks into the guide bore -5-.
Note
Pay attention that the electrical cables -1- and the fuel feed line
-3- are routed according to the illustration and the float arm -2- is
not blocked.
Continued for the fuel delivery unit type one and two
– Press the closing flange down and bring it into the installation
position.
Further information:
166
Rep. gr.20 - Fuel supply system
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�