Accelerator Control; Assembly Overview - Accelerator Module; Removing And Installing Accelerator Pedal Module - Skoda Octavia II 2004 Workshop Manual

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
2

Accelerator control

2.1

Assembly overview - accelerator module

1 - Connector
❑ black
❑ 6-pin
2 - Accelerator pedal module
❑ with accelerator pedal
position encoder - G79-
and accelerator pedal
position encoder 2 -
G185-
❑ for vehicles with auto‐
matic gearbox with kick-
down switch
❑ not adjustable
❑ -A- openings for release
tool - T10238- or -
T10240-
❑ Removing and installing
⇒ page 182
❑ When replacing, adapt
the engine control unit
⇒ Vehicle diagnostic
tester
3 - 10 Nm
4 - Cap
2.2 Removing and installing accelerator
pedal module
Special tools and workshop equipment required
♦ Release tool - T10238- (for left-hand drive vehicle)
♦ Release tool - T10240- (for right-hand drive vehicle)
182
Rep. gr.20 - Fuel supply system
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�