Connection Diagram For Coolant Hoses For Engines With Code Bud; Draining And Topping Up Coolant For Engines With Code Bmm - Skoda Octavia II 2004 Workshop Manual

1.9

Connection diagram for coolant hoses for engines with code BUD

1 - Coolant expansion tank
❑ with cap
❑ Check the overpressure
valve in the screw cap
⇒ page 149
2 - Radiator for exhaust gas re‐
circulation
❑ After replacing, fill with
fresh coolant
⇒ page 135
❑ Removing and installing
⇒ page 143
3 - Heat exchanger for heating
❑ After replacing, fill with
fresh coolant
⇒ page 143
4 - ATF radiator
❑ for models with an auto‐
matic gearbox
❑ After replacing, fill with
fresh coolant
⇒ page 143
5 - Cylinder head and cylinder
block
❑ After replacing, fill with
fresh coolant
⇒ page 143
6 - Top coolant hose
7 - Engine oil cooler
❑ After replacing, fill with
fresh coolant
⇒ page 143
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
❑ Removing and installing unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
⇒ page 122
8 - Radiator
❑ Removing and installing
❑ After replacing, fill with fresh coolant
9 - Bottom coolant hose
10 - Coolant pump/coolant regulator
❑ Removing and installing
11 - Auxiliary heating
1.10 Draining and topping up coolant for en‐
gines with code BMM
Special tools and workshop equipment required
♦ Catch pan for workshop cranes , e.g. -VAS 6208-
♦ Pliers for spring-type clips
♦ Refractometer - T10007-
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
⇒ page 146
⇒ page 143
⇒ page 147
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1. Removing and installing parts of the cooling system
143