Work procedure
Note
Safety precautions when working on the fuel supply system
♦
⇒ page 3
.
Observe the regulations concerning cleanliness when working
♦
on the fuel supply/injection system
– Remove engine cover
– Unplug connector -2- from air mass meter - G70- .
– Detach bleeder hose -1-, intake hose -3- and air guide hose
-5-.
– Unscrew screw -4- and remove air filter housing.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
– Release screw plug -arrow-.
⇒ page 4
.
⇒ page 13
.
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1. Removing and installing parts of the fuel supply system
175