Parts Of The Cooling System Engine Side For Engines With Code Bmm - Skoda Octavia II 2004 Workshop Manual

1.8

Parts of the cooling system engine side for engines with code BMM

1 - to the coolant expansion
tank at the top
❑ Connection diagram for
coolant hoses
⇒ page 143
2 - Top coolant pipe
❑ screwed onto the cylin‐
der head cover
3 - O-ring
❑ replace
4 - Retaining clip
❑ Check for secure seat‐
ing
5 - Coolant temperature send‐
er - G62-
6 - to radiator for exhaust gas
recirculation
❑ Connection diagram for
coolant hoses
⇒ page 143
7 - Connection fitting
❑ for cylinder head
8 - 10 Nm
9 - towards top radiator
❑ Connection diagram for
coolant hoses
⇒ page 143
10 - from heat exchanger
❑ Coolant return-flow line
❑ Connection diagram for
coolant hoses
⇒ page 143
11 - 40 Nm
12 - Distributor part
13 - from distributor part of top coolant hose
❑ Connection diagram for coolant hoses
14 - 15 Nm
15 - from the bottom coolant expansion tank
❑ Connection diagram for coolant hoses
16 - Coolant pipe
17 - Sealing ring
❑ replace
18 - Coolant temperature sender at radiator outlet - G83-
19 - 15 Nm
20 - to bottom radiator
❑ Connection diagram for coolant hoses
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
⇒ page 143
⇒ page 143
⇒ page 143
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1. Removing and installing parts of the cooling system
141