Skoda Octavia II 2004 Workshop Manual page 86

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
– Push camshaft sprockets onto hubs.
• The two tooth segments -arrows- on the camshaft wheels
must both be at the top.
– Slightly screw in plug -1-.
• Camshaft sprockets must still turn on the hubs, but must not
tilt.
– Lock hubs using rig pins - 3359- .
– Rotate crankshaft to TDC for cylinder 1.
– Depending on the version, lock the crankshaft toothed belt
sprocket using the crankshaft arrester - T10050- or crankshaft
arrester - T10100- .
Distinguishing the crankshaft toothed belt sprocket:
A = original version of toothed belt sprocket with circular tooth
flanks, rectangular TDC marking on tooth in 12 o'clock position
for cylinder 1 - use crankshaft arrester - T10050 -
B = new version of toothed belt sprocket with elliptical tooth flanks,
triangular TDC marking on the gap in the sprocket in 1 o'clock
position - use crankshaft arrester - T10100-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
80
Rep. gr.15 - Cylinder head, valve gear