Skoda Octavia II 2004 Workshop Manual page 146

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1 - Radiator fan - V7-
❑ with radiator fan control
unit - J293-
❑ Removing and installing
⇒ page 145
2 - 5 Nm
3 - Fan shroud
4 - Top coolant hose
❑ To connection fitting at
cylinder head
❑ Connection diagram for
coolant hoses
⇒ page 143
5 - O-ring
❑ Replace if damaged.
6 - Radiator
❑ Removing and installing
⇒ page 146
❑ After replacing, fill with
fresh coolant
⇒ page 143
7 - 5 Nm
8 - O-ring
❑ Replace if damaged.
9 - Bottom coolant hose
❑ to connecting piece for
coolant regulator on cyl‐
inder block
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
❑ Connection diagram for
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
coolant hoses
⇒ page 143
10 - 5 Nm
11 - 5 Nm
12 - Right radiator fan - V35-
❑ Removing and installing
140
Rep. gr.19 - Cooling
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
⇒ page 145