Skoda Octavia II 2004 Workshop Manual page 210

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
♦ Exhaust gas recirculation valve - N18-
♦ Solenoid valve for charge pressure control - N75-
6 - Air mass meter - G70-
7 - Coolant temperature sender - G62-
8 - Tandem pump
9 - Fuel temperature sender - G81-
10 - engine speed sender - G28 -
❑ Removing and installing
11 - Charge pressure sender - G31- with intake air temperature sender - G42-
12 - Intake manifold flap motor - V157-
13 - Mechanical exhaust gas recirculation valve
14 - Coolant temperature sender at radiator outlet - G83-
15 - 3-pin connector
❑ Hall sender - G40-
16 - Hall sender - G40-
❑ for camshaft position
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
204
Rep. gr.23 - Mixture preparation - injection
⇒ page 226