Skoda Octavia II 2004 Workshop Manual page 37

♦ Pressure pad - T10172 - with stud - T10172/4-
♦ Offset screwdriver - T10264-
♦ Rig tool - T10265-
♦ Pliers for spring-type clips
– Remove V-ribbed belt
– Remove bottom part of right wheelhouse liner ⇒ Body Work
⇒ Rep. gr. 66 .
– Unscrew screws -1- and -2- and remove charge air pipe
-arrows-.
– Remove crankshaft belt pulley. To do this, counterhold at the
central screw with a ring spanner.
For vehicles manufactured up until 05.05:
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
– Safety instructions when working on the injection system
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
⇒ page 3 .
– Disconnect the fuel supply hoses and fuel return hoses from
the fuel pipes at the body and at the engine.
Continued for all vehicles
– Unscrew the screw on the filler neck -2- of the windscreen
washer tank.
– Unscrew the coolant expansion tank -1- and place to the side
with connected cables.
⇒ page 23 .
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1. Disassembling and assembling engine
31