Parts Of The Cooling System Fitted To Body For Engines With Code Bmm - Skoda Octavia II 2004 Workshop Manual

WARNING
Shut off the opening of the charge air cooler, e.g. with a clean
foam piece, so that no coolant can penetrate.
– Place a catch pan under the engine.
– Remove the bottom coolant hose from the radiator; to do so,
pull retaining clips -arrow-.
– Detach top coolant hose from the radiator -arrow-.
– Screw out screws -arrows- and remove the radiator upwards.
Installing
Installation occurs in reverse order to removal. Pay attention to
the following:
♦ Tightening torques:
– I a new radiator has been fitted, the old (drained) coolant must
not be used for topping up.
– Top up coolant ⇒ page 135
1.7

Parts of the cooling system fitted to body for engines with code BMM

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
⇒ page 129
.
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1. Removing and installing parts of the cooling system
139