Inspecting The Exhaust System For Leaks - Skoda Octavia II 2004 Workshop Manual

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
– Align rear part of exhaust system:
• There must be an equal distance -a- between bumper opening
and exhaust tailpipe.
• The distance -b- from the bumper opening to the exhaust tail‐
pipes is equal.
For aligning, loosen the hangers of the exhaust gas system.
1.7

Inspecting the exhaust system for leaks

– Start engine and run in idle.
– Seal off exhaust tailpipe for the duration of the leak check (e.g.
with cloths or plugs).
– Inspect connection points of cylinder head/exhaust manifold,
exhaust gas turbocharger/pre-exhaust pipe etc. for leak-tight‐
ness by listening.
– Eliminate any leak found.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
240
Rep. gr.26 - Exhaust system
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�