Skoda Octavia II 2004 Workshop Manual page 148

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
21 - Connection fitting
❑ with coolant regulator
22 - Coolant regulator
❑ Removing and installing
❑ check: heat up regulator in a water bath
Start of opening approx. 87 °C
completely open approx. 102°C
Stroke: at least 7 mm
23 - Coolant pipes at the back
❑ Vehicles with auxiliary heating
❑ Connection diagram for coolant hoses
24 - from radiator for exhaust gas recirculation
❑ Connection diagram for coolant hoses
25 - to heat exchanger
❑ Connection diagram for coolant hoses
26 - Coolant pump
❑ check smooth operation
❑ Check fitting position
❑ Removing and installing
27 - Engine oil cooler
❑ Removing and installing
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
142
Rep. gr.19 - Cooling
⇒ page 147
⇒ page 143
⇒ page 143
⇒ page 143
⇒ page 147
⇒ page 124