– Switch off ignition and pull out ignition key.
– Remove cylinder head cover
– Disconnect central plug connection on cylinder head. To do
so, pull the release mandrel in -arrow direction 1- and open
the knurled nut in -arrow direction 2-.
– Place key - T10310- on the reduction ring and release the ring
with a torquing angle of 90 ° (
-arrow direction-.
– Slightly raise the safety clamp -1- with a screwdriver and push
through the central plug connection -2- towards the inside.
– Disconnect connectors -1- for unit injectors while pressing the
locking pins.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
⇒ page 72
.
1
/ 4 turn) in the
Octavia II 2004 ➤ , Octavia II 2010 ➤
1. Repairing Diesel Direct Injection system
207