Skoda Octavia II 2004 Workshop Manual page 140

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1 - Coolant expansion tank
❑ with cap
❑ Check the overpressure
valve in the screw cap
⇒ page 149
2 - Cylinder block
❑ After replacing, fill with
fresh coolant
⇒ page 135
3 - Radiator flap for exhaust
gas recirculation
4 - Radiator for exhaust gas re‐
circulation
❑ After replacing, fill with
fresh coolant
⇒ page 135
❑ Removing and installing
⇒ page 241
5 - Cylinder head
❑ After replacing, fill with
fresh coolant
⇒ page 135
6 - Non-return valve
❑ The arrow on the non-
return valve must point
to the exhaust gas recir‐
culation radiator
7 - Non-return valve
❑ integrated in the coolant
hose
❑ not visible from the out‐
side
8 - Heat exchanger for heating
❑ After replacing, fill with fresh coolant
9 - During operation of the auxiliary heater - N279-
10 - ATF radiator
❑ for models with an automatic gearbox
❑ After replacing, fill with fresh coolant
11 - Top coolant hose
12 - Engine oil cooler
❑ After replacing, fill with fresh coolant
❑ Removing and installing
13 - Radiator
❑ Removing and installing
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
❑ After replacing, fill with fresh coolant
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
14 - Bottom coolant hose
15 - Coolant pump/coolant regulator
❑ Removing and installing
16 - Auxiliary heating
134
Rep. gr.19 - Cooling
⇒ page 135
⇒ page 135
⇒ page 135
⇒ page 122
⇒ page 138
⇒ page 135
⇒ page 147