Replacing The Sealing Ring For Camshaft For Engines With Code Bmm - Skoda Octavia II 2004 Workshop Manual

2.11 Replacing the sealing ring for camshaft
for engines with code BMM
Special tools and workshop equipment required
♦ Insertion tool - MP 1-214 (10-203)-
♦ Sealing ring extractor - T30003 (3240)-
♦ Counterholder - T10051-
♦ Extractor - T10052-
♦ Screw M12 x 65
Removing
• Cylinder head attached at engine.
– Remove toothed belt
– Remove the locking pin - 3359- .
– Remove the screws from the toothed belt pulley -arrows- and
the camshaft sprocket from the hub.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
– Loosen the fixing bolt of the hub -1- by approx. 2 turns; use
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
the counterholder - T10051- to do so.
– Position the extractor - T10052- and screw the screws -1- into
the hub.
– Pull off the hub; to do so, counterhold the hexagon wrench
(SW30) of the extractor and screw in the screw -2-.
– Position the inner part of the sealing ring extractor - T30003-
so that it is flush with the outer part, and lock with the knurled
screw.
⇒ page 38 .
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
113
2. Repairing Valve Gear