Removing And Installing Charge Air Cooler - Skoda OCTAVIA Workshop Manual

21
¡ ¢ ¡ £
------------ ------------
Turbocharging
Removing and installing charge air
cooler
Special tools, testers and aids required
♦ Torque wrench
♦ Pliers for spring strap clips
K - Remove noise insulation in middle and on
right -arrows-.
K - Detach fuel lines -arrows- to injection pump,
seal with plugs and place to the side.
- Unplug connector -2- at intake manifold tem-
perature sender -G72 together with intake
manifold pressure sender -G71.
- Remove air guide pipe -1-.
- Remove windshield washer fluid reservoir.
K - Unscrew 2 bolts -arrows- for charge air
cooler.
Note:
If the vehicle is equipped with xenon headlights,
the right headlight must be removed ⇒ Electri-
cal System; Repair Group 94.
OCTAVIA
Edition 05.01
S00.5110.55.20