Cooling System: Check - Skoda Octavia IV 2020 Service Manual

– Insert the connector -1- for the trailing pump.
– After filling with oil, run engine until it is at operating temper‐
ature and inspect for tightness.
– Install the noise insulation.
Specified torques
Oil drain plug for oil pan
Screwed cover for oil filter:
Oil drain plug for screwed cover
Screw for coolant pump
3.10

Cooling system: check

⇒ a3.10.1 ntifreeze protection, replenishing coolant additive if
necessary", page 57
⇒ c3.10.2 oolant level (volume)", page 61
⇒ s3.10.3 ystem for high-voltage system: Check frost protection
and coolant level", page 62
3.10.1 Inspecting antifreeze protection, re‐
plenishing coolant additive if necessary
Special tools and workshop equipment required
♦ Refractometer -T10007A- or -T10007B- or -VAS 531 005-
WARNING
♦ Coolant additives are toxic!
♦ Do not inhale coolant vapours, do not swallow cool‐
ant, avoid contact with skin and eyes; hazardous if con‐
sumed!
♦ Observe the disposal instructions for the drained cool‐
ant.
Octavia IV 2020 ➤, Octavia IV 2021 ➤
Maintenance - Edition 12.2020
Nm
30
25.
5.
23.
57