Cooling; Parts Of Cooling System - Summary Of Components; Parts Of The Cooling System Fitted To Body - Skoda FABIA 2000 Workshop Manual

FABIA 2000 1.0/37; 1.4/44; 1.4/50 Engine, Mechanical Components
19 – Cooling
19-1 Parts of cooling system -
Summary of components
Note
♦
When the engine is warm the cooling system is under
pressure. If necessary reduce pressure before re-
pairs.
♦
The hose connections are secured with spring-type
clips. In the event of repairs only use spring-type clips.
♦ Always replace seals and gasket rings.
♦ When installing fit the coolant hoses free of stress,
without them touching any other components (pay at-
tention to the marking on the coolant connection and
hose).
Coolant mixing ratios ⇒ 19-1 page 6

Parts of the cooling system fitted to body

1 - Radiator
removing and installing
⇒ Chapter 19-2
after replacing, fill entire sys-
tem with fresh coolant
2 - O-ring
replace
3 - Top coolant hose
attached to radiator with re-
taining clips
Connection diagram for cool-
ant hoses ⇒ 19-1 page 5
4 - Cover plate
check pressure ⇒ 19-1
page 7
5 - Connector
6 - Double screw, 2 Nm
7 - Air duct scoop
8 - 5 Nm
9 - 5 Nm
10 - Expansion bottle
check the coolant system for
tightness ⇒ 19-1 page 7
connection diagram for cool-
ant hoses ⇒ 19-1 page 5
11 - Retaining clip
for fan cable
check tightness
12 - Auxiliary fan
for vehicles with air condi-
tioning system or additional
equipment
Edition 02.02
S00.5305.03.20
1 2
20
19 18
17 5
2 15

Parts of cooling system - Summary of components

3
7 8
5
16
14
5 8
19
4 5 6
9
10
11
12
13
9
S19-0074
19-1 1
page