Overview Of Operating Sequences On Server Switch-On / Switch-Off - Fujitsu Siemens Computers SX series User Manual

Operating concept of the SX servers
An ISDN telephone connection is also required in the vicinity of the system.
i
Teleservice Call Management is a central instance in X2000 which makes it possible to
automatically report error messages from the Solaris/X2000/BS2000 area of a partition to
the Teleservice center.
The error messages are assembled in logs by Logging V3.0 and are then categorized by
message type and passed to Teleservice Call Management in the form of Teleservice calls.
This processes the messages before routing them on to Remote Service 2000 (rs2k). The
Remote Service 2000 transfers the messages to the Teleservice center.
Logging V3.0 has a user interface that can be called via the PRIMEPOWER ServerView
(System - Diagnostics button). By default, all the settings are configured in such a way that
the corresponding error messages can be selected and forwarded as Teleservice calls.
Teleservice Call Management does not possess its own user interface since no configu-
ration measures are required from the user here. Any Teleservice Call Management error
messages are stored in Logging V3.0 with the ID SMAWLtsca in the module name.
Remote Service 2000 has a user interface which is not dependent on PRIMEPOWER
ServerView and which can be used to configure the settings for the transfer of Teleservice
calls.
For further information on Teleservice in Solaris, refer to the manuals "Teleservice
(Unix)" [31], "LAN Console or System Management Console (SMC)" [9] and
System
2.6 Overview of operating sequences on server switch-on /
switch-off
This section gives an overview of the actions and operating sequences involved in switching
the SX server on and off.
The commands and actions refer to the operation of a variety of functions. These are
explained in detail in the individual chapters and here are simply listed in summary form as
a comprehension aid.
U41272-J-Z385-3-76
If no ISDN connection can be provided then an analog modem must be ordered
separately.
Diagnostics" [28].
Operating sequences on server switch-on / switch-off
"Solaris
23