Messages Referring To Channel Devices - Fujitsu Siemens Computers SX series User Manual

IOD messages

13.3.2 Messages referring to channel devices

The messages issued by the I/O handler for channel devices begin with the message codes
IODAxxx to IODZxxx.
IODC000 IOS0000 IOD CHANNEL STARTUP FINISHED
Meaning
This message indicates that IOD channel startup has run correctly.
IODC002 IORSF TITLE: ...
IODC003 IOCFID: ....
Meaning
These both messages specify the title of the loaded IORSF.
IODE000 CHPID xx module soft error
Meaning
The module firmware has performed internal error handling and generated a logout.
Response
The error has been eliminated for the present by the error handling operation. Nevertheless,
the result of the analysis of the corresponding logout should be evaluated and maintenance
undertaken if necessary.
IODE020 CHPID xx module error
Meaning
This message is issued at the start of module stop error handling. This message is for
diagnostic purposes and is output only if the service engineer specifies this explicitly.
Response
See the messages IODE021, IODE022.
IODE021 CHPID xx module error: module restarted
Meaning
Module stop error handling has been performed successfully. The module has been
initialized and started. A logout has been stored.
Response
The error has been eliminated for the present by the error handling operation. Nevertheless,
the result of the analysis of the corresponding logout should be evaluated and maintenance
undertaken if necessary.
352
X2000 messages
U41272-J-Z385-3-76