Functions Of The Sx Server Entry-Level Models; Switching On/Off Functions - Fujitsu Siemens Computers SX series User Manual

5 Functions of the SX server entry-level models

5.1 Switching on/off functions

The SX server entry-level models are switched on and off via the power button on the
control panel of the system unit:
To switch on, press the power button once. The X2000 carrier system (in the normal
Ê
setting of the mode selection switch to LOCK) and the operating system BS2000/OSD
for activated automatic IPL (see
To switch off, press the power button twice in succession. BS2000/OSD is then termi-
Ê
nated with shutdown, the X2000 carrier system is terminated and the system unit
switched off.
You will find details on switching on/off via the control panel in the SX1xx Operating
Manual [2] for the SX entry-level servers.
Time-controlled switching on/off is also possible by means of software functions on the
machine administration menu. This is described in the
the server" on page
U41272-J-Z385-3-76
"BS2
128.
KVP" on page 215) are then loaded.
section "Timed switching on/off of
125