Fujitsu Siemens Computers SX series User Manual page 171

Operating BS2000 instances
dipl – start BS2000 dump IPL
A form is opened to start BS2000:
2
IPL load device:
consol device:
IORSF level:
IPL parameter [d|u]:
clear BS2000 memory [y|n]:
IPL parameter [d|u]:
For further information, see the command
First, an IOH dump and an IOS dump are created:
–
–
The SLED is then started. The IOH and IOS dumps are stored in the SLED.
vipl – start VM2000
A form is opened to start VM2000:
2
IPL-Ladegeraet:
Konsolgeraet:
IORSF-Level:
IPL-Parameter [a|d|f]:
BS2000 Systemname:
BS2000 Speicher loeschen [y|n]:
This command starts VM2000.
For further information, see the command
vmmr – VM monitor restart
This command restarts the VM monitor system. A prompt is displayed to ensure that
you do not forget to execute the command; enter y in the prompt to execute the
command.
This command only takes effect in the VM mode.
1
The old context is overwritten with the current context (SLED by SLED).
U41272-J-Z385-3-76
start BS2000 dump IPL
d SLED startup (default)
u UNLOCK
The IOH dump is stored in the directory
/var/opt/SMAW/X2000/dump with the name
RMA_S.<IOH abend code>.<DateTime>.<X2000 version>. If no IOH abend
code is available, SLD000 is used.
The IOS dump is compressed and stored in the directory
/var/opt/SMAW/X2000/dump/channel with the name
IOSDUMP.<DateTime>.Z.
VM2000 starten
D1
Z0
-
d
n
1
"ipl – Start BS2000" on
4822
Z0
-
a
DEMVM1
n
"ipl – Start BS2000" on
BS2000 console mode
page 169.
page 169.
171