Figure 117: Primepower Serverview: Modifying Obp Settings - Fujitsu Siemens Computers SX series User Manual

Dynamic Reconfiguration
In the following example After reboot is set to Off for XSB 01-1 (here named Systemboard_1-1)
so that the XSB is not put into operation the next time Solaris is booted.

Figure 117: PRIMEPOWER ServerView: Modifying OBP settings

Further settings relevant to DR
The system boards may not be operated in (Memory) Interleave Mode. If necessary,
this can be set via the Machine Administration Menu on the SMC of the SX server.
The following must be set in the /etc/system file:
set kernel_cage_enable=1
With this setting Solaris attempts to create the kernel memory on just one XSB. This is
always possible for BS2000 partitions in which X2000/Solaris only requires 2 GB of
memory.
U41272-J-Z385-3-76
Performing DR
323