Set_Spd Messages - Fujitsu Siemens Computers SX series User Manual

X2000 messages
..NM020 reconfiguration logout saved
Meaning
Runtime message: A reconfiguration logout was written.
..NM100 ioctl (<request>) failed, .......
The system error message is appended to the message.
Meaning
Software error: The IOCTL request <request> has been aborted.
13.5.5.7

set_spd messages

..PM096 fread() failed <Cfile>
Meaning
Software error: The configuration file <Cfile> could not be read.
..PM097 fopen() failed <Cfile>
Meaning
Software error: The configuration file <Cfile> could not be opened. The path rights may
have been set incorrectly, the file system may be defective or full or the file may have been
deleted.
U41272-J-Z385-3-76
X2000 channel connection error messages
375