Fujitsu Siemens Computers SX series User Manual page 342

KVP messages
KVP0054 INPUT TO (&00) REJECTED UNTIL LOGGING IS POSSIBLE
&00 = Partner (SYS, SVP)
Response
The original error must be eliminated (see the preceding messages). You can then repeat
the input. If it is not possible to eliminate the original error, logging may also be deactivated.
KVP0070 NO WORKING-STORAGE AVAILABLE FOR (&00) - ENTER INPUT AGAIN
&00 = KVP name (HV0, VM1, VM2 etc.)
Response
You must repeat the input. If this does not help, you must terminate KVP via the "KVP
Administration" menu and then restart it.
KVP0071 INPUT LOCKED - PRESS F2 KEY
Response
Input is currently locked. You can press the F2 key to open a selection screen in which you
can unlock input. To do this, you must enter the password.
If the UNIX login is locked, access to the console is aborted. Use of the login remains locked
until the password corresponding to the login is defined via the UNIX user administration.
KVP0072 'LAST MESSAGES' CAN NOT BE DISPLAYED - NO MEMORY AVAILABLE
Meaning
The menu function "LAST MESSAGES" cannot be executed because the file system is full.
Response
Delete any unnecessary files.
KVP0111 STATION (&00) CONNECTED FROM TERMINAL ((&01)) AS CONSOLE (&02)
&00 = User ID, &01 = Device name, &02 = Mnemonic name of console or SVP device
KVP0112 STATION (&00) DISCONNECTED FROM TERMINAL ((&01)) AS CONSOLE (&02)
&00 = User ID, &01 = Device name, &02 = Mnemonic name of console or SVP device
KVP0120 INVALID BS2000 MESSAGE TO CONSOLE (&00)
&00 = Mnemonic name of console
Meaning
The specified length of a BS2000 message does not correspond to the received length. The
message is also output if console I/O traffic is disrupted.
Inform the service staff because a system/hardware error or an internal overwrite error has
occurred.
342
X2000 messages
U41272-J-Z385-3-76