Operating BS2000 instances
7.4.4 MTC devices
Setting an occupancy option for MTC devices
You can specify that an MTC device is also to be occupied whenever the X2000 communi-
cation on BS2000 systems which can also use the device is disrupted:
Ê
sx.bs2mtcfetch
Meaning:
For further information, see
cation is disrupted" on page
Showing the occupancy status of an MTC device
You can show the occupancy status of an MTC device for the BS2000 systems that share it:
Ê
sx.bs2mtcfetch
Meaning:
For further information, see
page
240.
7.4.5 Querying the configuration
You can output the configuration of the X2000 system:
sx.chk_conf -h Ú
Ê
You can select the quantity of information to be output. The option -h outputs a short
description of the selection options on screen.
U41272-J-Z385-3-76
-f tape-MNÚ
Force option
-f
tape-MN Mnemonic name of the MTC device
section "Occupying an MTC device when X2000 communi-
239.
-l tape-MNÚ
List option
-l
tape-MN Mnemonic name of the MTC device
section "Displaying the occupancy status of an MTC device" on
EVENT mode
193