Configuring The Seh Printserver - Fujitsu Siemens Computers SX series User Manual

Global X2000 functions

9.5.2 Configuring the SEH Printserver

In SX systems, printers are connected via an adapter produced by the company SEH, the
so-called SEH Printserver. This print server may take the form of a separate adapter box
(e.g. a pocket adapter with type name IC105) or an integrated LAN card (e.g. in the case of
the 9017 printer).
To configure the print server, you must assign the IP address or host name to the hardware
address (MAC address):
Ê Log in under root to a UNIX computer which is located in the same subnetwork as the
SEH Printserver.
Ê Enter the following command:
arp -s <IP-address> <hardware-address>
arp -s <hostname>
Example
arp -s 139.22.8.150
You can check the connection with ping <IP-address> or ping <hostname>. If the
connection is intact, the following response message is output:
<IP-address> is alive
1.
There must be an entry for the <IP-address> and <hostname> assignment in the file /etc/hosts!
U41272-J-Z385-3-76
or
1
<hardware-address>
0:c0:eb:0:3:15
Configuring printers
251