Fujitsu Siemens Computers SX series User Manual page 48

User groups and logins
e) As of PRIMEPOWER ServerView V2.2B the access rights of this user ID can be
2. Set up the SCS user interface (Terminal in the Application Manager) for the server
administrator using the following command (which must be performed with root
authorization):
The option -a here stands for "administrator".
48
– No entries are required in the "Supplementary groups" section for someone who
is exclusively an SX server administrator.
If PRIMEPOWER ServerView is also to be operated in write mode under this
user ID, wsauser must be selected as the secondary user group. The secondary
user group wsaruser must be selected for operation in read mode. Membership
in one of the two user groups wsauser or wsaruser also causes this user process
to run in PRIMEPOWER ServerView with root authorization.
– Select a login shell.
– A comment can be specified if necessary.
The home directory in Solaris (in this example /export/home/sxadmin1) is
created automatically.
defined more specifically with regard to access to applications in PRIMEPOWER
ServerView and access to nodes in the administration domain. Further details are
provided in the section "Privilege concept with Role-Based Access Control" on
page 201ff.
/opt/FJSVscsl/bin/scslowneradd -a <username>
Functions of the System Management Console
U41272-J-Z385-3-76