Preparation; Floorstand Model; Opening The Server - Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual

4

Preparation

V
CAUTION!
Follow the safety instructions in
et seq..
4.1

Floorstand model

4.1.1

Opening the server

Ê Exit all applications and shut down the server properly.
Ê Press the On/Off button if the server has not been switched off by the
operating system.
Ê Pull all power connectors out of the power outlets.
Figure 2: Opening the server
Ê Open the latch (1).
The opening of the latch pushes back the side cover and disengages the
hooks on the top of the side cover.
Ê Remove the side cover (2).
TX200 S4
2
1
Options Guide
chapter "Safety instructions" on page 15
21