Fujitsu Siemens Computers SX series User Manual page 175

Operating BS2000 instances
–
U41272-J-Z385-3-76
Printer
[CHOICES] opens a window in which you can select a printer.
If only a small number of printers are available, no new window is opened. In this
case, the name of a printer is entered directly in the form. By repeatedly pressing
[CHOICES], you can select the required printer.
The logging file is then printed on this printer or placed in the queue for this printer.
For more detailed information on printers and print jobs, see the manual
Management V6.0A
The spool administrator should ensure that there is a printer available for
i
root and all KVP users, to print out ASCII files.
The logging file is printed out with a width of 100 characters (unlike when it is shown
or archived, when it has a width of 80 characters).
Format of the logging file
The entries in the logging file have the following format:
Source Target hhmmss Text
1 2
No. Meaning
1 Source and target of message or command
(Partner SYS or HAL / user CONS0, CONS1, ...)
2 Time
3 Message Text: If the message extends beyond one line, it is continued under the
beginning of the message on the next line.
The first line has the following format:
LOG KVPLOG.020620.165153 <- KVPLOG.020620.160000
LOG is specified as the source of the message for KVPLOG. The name of the
current logging file comes after this. If an arrow with the name of an older logging
file exists, this was the predecessor of the current file. No messages have then been
lost.
If logging was not possible at a particular point, causing messages to be lost, no
predecessor file will be specified here. When the Solaris system and consequently
the KVP is restarted, no predecessor file will yet exist.
GUI" [22].
3
BS2000 console mode
"Xprint
175