Fujitsu Siemens Computers SX series User Manual page 346

SVP emulation messages
SVR0020 Channel initialization active, please wait
Meaning
Channel initialization is not yet complete.
Response
Wait until channel initialization is complete.
SVR0021 IOD channel initialization started - please wait
Meaning
IOD channel initialization has been started.
Response
Wait until channel initialization is complete.
SVR0022 IOD channel initialization finished
Meaning
IOD channel initialization has been performed correctly.
SVR0024 IOD IORSF-level started
Meaning
Output of IORSF file list
SVR0025 IOD IORSF-level finished: OK
Meaning
Output of the IORSF file list has been completed successfully.
SVR0027 No IORSF level found - 0 is assumed
Meaning
No IORSF level was specified during an IPL following a new installation. The default
IORSF level 0 is used.
Response
Specify the correct IORSF level on the next IPL.
SVR0029 VM not active - START system in native mode
Meaning
The system will be started in native-mode, while the VM-Mode is not activated.
Response
If VIPL is really wanted, activate the VM-Mode via PrimePower ServerView Suite.
346
X2000 messages
U41272-J-Z385-3-76