Bs2000 Or Solaris Administrators - Fujitsu Siemens Computers SX series User Manual

User groups and logins

4.1.3 BS2000 or Solaris administrators

To manage the operating systems of individual partitions, it may be useful to configure user
IDs which do not have extended rights relating to the management of the hardware of the
server (like server administrators or partition administrators).
These user IDs must however be able to read the data of the RC2000 consoles of the parti-
tions.
These IDs are also suitable for the administrator for preconfiguring terminals to access the
partitions (see also
The following actions are needed to configure a user ID of this type:
1. Set up the login with PRIMEPOWER ServerView in the user group clmon:
a) Start PRIMEPOWER ServerView (see the
b) Select the Users application
c) Select Users -> Create from the menu bar
d) Create a new user (e.g. user name bs2adm1) as a member of the user group clmon
52
section "Preconfiguring terminals" on page
ServerView Suite" on page
No entries are required in the "Supplementary groups" section for someone who is
exclusively an SX server administrator.
If PRIMEPOWER ServerView is also to be operated in write mode under this user
ID, wsauser must be selected as the secondary user group. The secondary user
group wsaruser must be selected for operation in read mode. Membership in one of
the two user groups wsauser or wsaruser also causes this user process to run in
PRIMEPOWER ServerView with root authorization.
As of PRIMEPOWER ServerView V2.2B the access rights of this user ID can be
defined more specifically with regard to access to applications in PRIMEPOWER
ServerView and access to nodes of the administration domain. Details on this can
be found in the section "Privilege concept with Role-Based Access Control" on
page 201ff.
Functions of the System Management Console
section "Starting PRIMEPOWER
196)
32).
U41272-J-Z385-3-76