Fujitsu Siemens Computers SX series User Manual page 62

Functions of the System Console Software (SCS)
Switching the entire server on
The function System Power-On Instruction switches the server on if it is switched off.
Switching on the server via this menu item has the same effect as powering on the server
via the control panel on the front side of the SX server (see the SX1xx Operating
Manual [2]).
1. Select the function System Power-On Instruction from the menu System/Partition Power
Administration:
1 <RETURN>
The following screen output enables the status of the server power supply to be
checked first:
machine0 System-Specific Administration
System Power-On Instruction
System Power status
Do you want to issue the power-on instruction
to this system? (y:
q:Quit
-------------------------------------------------------------
Select.(y,q,b,t,h):
In this example, the server is switched off.
2. To switch the server on, enter:
y <RETURN>
If the server is already switched on (on status), the action is ignored.
62
OFF
yes)
b:Back to previous menu
Functions of the System Management Console
t:Go to top menu h:Help
U41272-J-Z385-3-76