Table 4: Message Texts With Message Code Svr0002 - Fujitsu Siemens Computers SX series User Manual

BS2000 console mode
Clear BS2000 memory [y|n]:
The form is sent by pressing [SAVE].
When the IPL has been started, the console screen is automatically activated.
Messages may be output which provide information on the state of the computer or on
errors which may have occurred.
If the IPL was executed correctly, a message is output with the message code SVR0001
(see
If the IPL was executed incorrectly, a message is output with message code SVR0002
(see
Messages
No IPL possible for this device
IPL device not installed
Error with device status
Error with channel status
IO with CC=1
IO with CC=3
Invalid IPL data
System Error
Equipment check
intervention required
Wrong console device

Table 4: Message texts with message code SVR0002

170
y Clear BS2000 memory
n Do not clear BS2000 memory
page 344): IPL OK.
page 344). Possible message texts:
Operating BS2000 instances
Meaning
Load device is neither DISK nor TAPE.
Load device is not configured.
IPL CCW execution by load device termi-
nated with error.
IPL CCW execution by load device termi-
nated with error.
Load device is active.
Load device or path not available.
BS2000 boot block contains errored
channel program.
BS2000 boot block contains incorrect data.
Load device error.
Load device requires operator intervention.
SKP write path is not configured.
U41272-J-Z385-3-76