Bs2000 Transaction Processing Mode - Fujitsu Siemens Computers SX series User Manual

EM9750 mode

7.3.3 BS2000 transaction processing mode

If you wish to work in transaction processing mode, you must establish a connection to the
required application in the target computer. To establish a connection (see
select "Manual Connection" from the menu (see
Ê Enter the name of the application in the field "(N5) Personal Name" (partner name in
the form LBS20application). <CR> completes the entry.
Example
2
Global Name:
(N1) Country
(N2) Admin. Domain
(N3) Priv. Domain
(N4) Organization Unit
(N5) Personal Name
Use the replacement character ^ to fill in any blanks in the name.
Ê Only when attributes are needed: Press [ATTRIBUTES] (F4).
A window is opened in which you can define the connection attributes:
3
Partner:
Alias:
Message:
Password:
OPCH:
Netpassword:
i
When you have completed the form, press [SAVE].
Ê
The terminal is now connected to the application. Generally, an opening screen appears.
If the menu for controlling the connection is output again instead of the opening screen of
the application, the connection could not be established. The following errors may have
caused this:
– Input errors (e.g. incorrect name of the application).
Try again with the correct details.
– The partner system or line to the partner computer is currently not available.
Try again later.
– The application is not loaded on the partner computer.
Ask the system administrator of the partner computer to load the application.
– The name of the partner must previously have been defined in TNSX (see the manual
"CMX V5.1
190
em9750: Manual Connection
LBS20ANW1
em9750: Define Connection Attributes
LBS20ANW1
LBS20ANW1
None
None
For a description of this form, see
(Solaris)" [24]).
Operating BS2000 instances
page 184):
page 185.
page 183),
U41272-J-Z385-3-76