Fujitsu Siemens Computers SX series User Manual page 184

EM9750 mode
List
This function outputs a numbered list of pre-defined connections. The required
connection is selected by positioning the cursor and pressing the key [CONNECT] (F3).
If more pre-defined connections are available than are displayed, a further list is output
by pressing the key [n].
The description of how connections can be pre-defined for a user is given in manual
"EMDS
After initializing the establishment of a connection, the following process is performed:
–
–
–
–
Manual Connection...
This enables connections to be established manually to any partner, i.e. data for estab-
lishing the connection (partner name, connection password, user message) must be
entered. The following form appears when this function is selected:
2
Global Name:
(N1) Country
(N2) Admin. Domain
(N3) Priv. Domain
(N4) Organization Unit
(N5) Personal Name
You can make the following entries in the individual fields:
Country
Admin.Dom.
Priv.Dom.
Organization Unit
Personal Name
184
(SINIX)" [23].
If another connection password has to be entered, a corresponding prompt appears
on screen.
After entering the password, or if no password needs to be entered, the connection
is established. The following message appears on the screen:
Waiting for connection... .
When the connection has been established, the BS2000 screen appears with the
message CN04 CONNECTED TO partner or the welcome screen of an application
appears, depending on the connection partner.
If the connection cannot be established, you will receive an error message. The line
Reason num... then contains information on why the connection was not estab-
lished. The error messages are listed in the manual
em9750: Manual Connection
Max. 2 characters long
Administrative Domain, max. 16 characters long
Private Domain, max. 16 characters long
Organization Unit, max. 10 characters long
Max. 30 characters long
Operating BS2000 instances
"EMDS (SINIX)" [23].
U41272-J-Z385-3-76