Fujitsu Siemens Computers SX series User Manual page 90

Functions of the System Console Software (SCS)
Diagnostics routines
probe-scsi
probe-scsi-all
Show commands
show-post-results
show-devs
show-disks
show-tapes
show-nets
Showing/setting aliases
devalias
devalias <name> <path>
nvalias <name> <path>
nvunalias <name>
Troubleshooting for RED State Exception
.registers
.locals
ctrace
Troubleshooting after the system has hung
sync
Miscellaneous
.version
.speed
.enet-addr
banner
setenv diag-level <value>
setenv diag-switch? <value>
90
Functions of the System Management Console
Probes SCSI devices on the first SCSI controller
Probes SCSI devices on all SCSI controllers
Show POST result
Show all installed devices (including hardware path)
Show path of disks
Show path of tape devices
Show path of networks
Shows aliases
Sets aliases (volatile)
Sets aliases (permanent)
Deletes an alias
Version of OBP, POST, SCF & RCI
Clock frequency of CPU, UPA and PCI
MAC address on basis of Ethernet adapter
Shows boot system information
Sets diagnostics level (values: off, min, max)
Outputs POST information at the console
(values: true, false; default: false)
U41272-J-Z385-3-76