Fujitsu Siemens Computers SX series User Manual page 167

Operating BS2000 instances
There are two options:
–
–
Select an option with the key [CHOICES] and then press the key [SAVE], to execute the
operation.
Load – Load PFKeys from File
This function opens a selection window which displays the names of all PFKey files in
the PFKey directory.
When you have selected a PFKey file and pressed the key [SAVE], the assignment of
the PFKeys is valid for the active session.
Unload – Unload PFKeys
This function deactivates the valid PFKey assignment, if available.
Edit – Create/Update PFKey File
This function opens a selection window which displays the names of all PFKey files in
the PFKey directory. If necessary, you can scroll through the contents of the window.
Select a PFKey file or the file "NEW" and press the key [ENTER]. This displays the
contents of the file for modification/creation. Then press the SAVE key, to write the
displayed contents back into the original file or to create a new file.
The PFKey assignment remains unchanged (see "Load").
U41272-J-Z385-3-76
the "start" option:
3 Programmable Function Keys: Options
Automatically Load PFKeys
The "start" option immediately loads and activates the selected PFKeys for this
session. A restart automatically loads and activates them for all other consoles with
the same user ID.
This function is only executed for consoles with the same user ID as the console
which calls it. A note (-> auto_load.<id>) is output in the description line of the
PFKey file.
The user can unload the automatic PFKey assignment during a session at any time
or load another PFKey file.
the "stop" option:
3 Programmable Function Keys: Options
Automatically Load PFKeys
The "stop" option stops the PFKeys from being automatically loaded. All PFKeys
which have already been loaded remain valid. The note (-> auto_load) is
removed. This function may be executed by any user console.
start
stop
BS2000 console mode
167