Figure 103: Example Of Creating A New Bs2000 Lan Device - Fujitsu Siemens Computers SX series User Manual

Global X2000 functions
Example of VM2 guest system

Figure 103: Example of creating a new BS2000 LAN device

The same applies to all other guest systems.
Configuration in VM2000
The communication devices must be assigned to the appropriate guest system.This is
done, using the example above, by entering the following VM2000 administration
commands:
/ADD-VM-DEVICES (Y0,Y1),VM-ID=1
/ADD-VM-DEVICES (Y4,Y5),VM-ID=2
Configuration in guest systems
The connection paths must be made known to BCAM in all guest systems, either statically
in the corresponding RDF files or dynamically using the corresponding BCAM commands
in SDF format.
U41272-J-Z385-3-76
Local and remote communications
269