Cinit Messages - Fujitsu Siemens Computers SX series User Manual

X2000 channel connection error messages
..MM299 fseek() failed '<Fname>'
Meaning
File error/software error: The positioning in the file <Fname> was invalid. The file was not
opened or the position was beyond the end-of-file.
..MM401 illegal CHPID <chpid>; undefined channel group number
Meaning
Software error: The channel group selection of the channel path identification <chpid> is
incorrect.
..MM402 illegal CHPID <chpid>; undefined channel number
Meaning
Software error: The channel number of the channel path identification <chpid> is incorrect.
13.5.5.6

cinit messages

cinit message code:
<oc>
..NM001 usage description
usage : format: cinit <opcode>
<opcode>
Meaning
Basic or additional information: This message is output if the cinit program has been
called without arguments or may be output together with the error messages ..NM001
invalid opcode <oc> and ..NM001 too many arguments, and the possible arguments
for the operation codes are specified.
..NM001 invalid opcode: <oc>
The message ..NM001 usage description is also output.
Meaning
The cinit program was called with an incorrect operation code <oc>.
Response
The call must be repeated using the correct operation code.
..NM001 too many arguments
The message ..NM001 usage description is also output.
Meaning
The cinit program was called with more than two arguments.
Response
The call must be repeated using the correct arguments.
374
Selected HWI opcode (four characters)
-> on, init
X2000 messages
U41272-J-Z385-3-76