Fujitsu Siemens Computers SX series User Manual page 397

Appendix
The maximum power supply protection can be achieved by using the optional dual power
supply.
SX130 system peripherals
Channel peripherals (type 2 and type S) may be connected to the SX130 server via the
optional channel subsystem. The channel subsystem is connected by an SCI controller and
occupies a PCI slot of a system board in the BS2000 partition for up to 16 channel
connections. A further optional channel subsystem can be connected to the second system
board of the BS2000 partition, thus making a maximum of 32 channel connections available
on an SX130 in a BS2000 partition. Any combination of the channels of type 2 and type S
can be provided.
The channel subsystems are integrated in the service rack of the SX server.
In an SX130 server the system disks are integrated in the system cabinet (where there is
an expansion for a second Solaris partition also in the service rack).
In the basic version two disks (with capacities of 72 and 36 GB respectively) are assigned
to the (first) BS2000 partitions.
Optionally a FibreCAT or Symmetrix disk storage system can be connected via Fibre
Channel.
CentricStor and ITC/SBU can also be connected via Fibre Channel.
As an option, an SKP-SR may also be used for operating an SX130 server (see
"SKP-SR for BS2000 operation" on page
connected to it (e.g. ATOP) are built into the service rack. The SKP-SR and any other
remote operating stations are connected via the LAN.
U41272-J-Z385-3-76
409). The SKP-SR and any additional devices
Model ranges
section
397