Fujitsu Siemens Computers SX series User Manual page 272

Local and remote communications
BS2000
/CREATE-NODE .....
/CREATE-LINE ..... ,L2-PROTOCOL=*CSMACD(...,MAX-LPDU-SIZE=*BY-DEVICE)
/CREATE-PROCESSOR ...
/CREATE-ROUTE ..... ,L3-PROTOCOL=*IP(...)
/BCACT ...
i
Redundant and DR-secure BCAM connections
In a partition in which DR processes are planned, redundant BCAM connections using two
system boards are required as in the following example:
/DCOPT ...
/BCOPTION ...
/
/CREATE-NODE NODE-NAME=RZLAN, -
/
/
/CREATE-LINE LINE-NAME=RZLAN#1, -
/
/
/
/
/
/CREATE-LINE LINE-NAME=RZLAN#2, -
/
/
/
/
/
/CREATE-PROCESSOR PROCESSOR-NAME=RZLANFW1
/CREATE-ROUTE ROUTE-NAME=RZLANFW1, -
/
/
/
/
/...
/BCACT NODE=RZLAN, ACT=ALL
/ACTIVATE-LINE LINE=RZLAN#1
/ACTIVATE-LINE LINE=RZLAN#2
272
The following restrictions must be borne in mind when operating this configuration.
All the network components (switches, routers etc.) and all terminals must be
configured with this setting.
This configuration is only permitted with the TCP/IP protocol.
IP-SUBNET-MASK=255.255.0.0
L2-PROTOCOL=*CSMACD(NODE-NAME=RZLAN, -
WRITE-DEVICE=G4,READ-DEVICE=G5, -
SLOW-POLL=*ON,ROUTE-RESWITCHING=*ON),-
IP-ADDRESS=140.1.0.2
L2-PROTOCOL=*CSMACD(NODE-NAME=RZLAN, -
WRITE-DEVICE=J4,READ-DEVICE=J5,-
SLOW-POLL=*ON,ROUTE-RESWITCHING=*ON),-
IP-ADDRESS=140.1.0.12
PATH=*NODE(NODE-NAME=RZLAN, -
LINE-NAME=RZLAN#1, -
L3-PROTOCOL=*IP(IP-ADDRESS=140.1.60.4, -
OWN-IP-ADDRESS=140.1.0.2))
Global X2000 functions
U41272-J-Z385-3-76