Mirroring of internal disks in X2000
This menu field has the actions required to administer a mirror boot disk:
–
Set up a mirror disk
–
Add a disk to the mirror system (page
–
Remove a disk from the mirror system (page
–
Switch a disk from the mirror system to "standby" (page
–
Synchronize a standby disk (page
The following options are available:
–
Allow larger disk
–
Serialize resync.
9.2.1.1
Window of the boot mirror disk
The outputs of the last action plus the status of the boot mirror disk are displayed in the
status window.
9.2.1.2
Actions
Set up a mirror disk
The button Prepare mirror is activated when no mirror disk is yet available in the system. If
this is the case the root disk is proposed in the field First disk and can be prepared for the
mirror:
Click the button Prepare mirror (see
Ê
Ê
Click the button OK (see
At this point you must confirm that you do indeed want to prepare the disk for mirroring.
Click the button OK
Ê
A prompt asks if you want to carry out a reboot.
Click the button Yes.
Ê
i
The message that the PRIMEPOWER ServerView interface has lost the connection to
the host then appears.
Ê
Click the button OK
After the reboot further disks can be included in the mirroring.
226
figure 88 on page
If you click the button No, the boot disk is not set up for mirroring until the next
reboot.
227)
227)
227).
figure 88 on page
225)
225)
Global X2000 functions
227)
U41272-J-Z385-3-76