Operating BS2000 instances
You only need to enter the partner in the field "(N5) Personal Name". Complete the entry
with <CR> and press the key [CONNECT](F3).
The name of the partner must previously have been defined in TNSX (see the manual
"CMX V5.1
Ê
None
alphanumeric
hexadecimal
Ê
Options...
A selection menu with the following items is output;
–
–
–
U41272-J-Z385-3-76
(Solaris)" [24]).
If the application requires further attributes to establish the connection, they can be
passed by pressing [ATTRIBUTE] (F4):
This opens a window in which you can define the attributes:
3
em9750: Define Connection Attributes
Partner:
LBS20$DIALOG
Alias:
LBS20$DIALOG
Message:
Password:
None
OPCH:
Netpassword:
None
–
Message (max. 80 characters long)
A short message relating to the establishment of the connection can be entered
here.
–
Connection password
The key [CHOICES] (F2) defines whether a network password must be provided
in order to establish a connection. The following options are possible:
The user is not asked to enter a password.
An alphanumeric string must be provided as the network
password (max. 4 characters long).
A hexadecimal string must be provided as the network
password (max. 8 characters long).
–
OPCH max. 8 characters long
When an OPCH name is specified, the current terminal data is defined for the
connection.
–
Network password
No network password is needed for the establishment of a connection. No entry
needs to be made in this field.
Press [SAVE] (F3).
PFKey file
Hardcopy/Softcopy
Emulation status
EM9750 mode
185