Fujitsu Siemens Computers SX series User Manual page 366

X2000 channel connection error messages
...I201 hw-configuration changed (channel) - CHPID(s): <chpid> ...
Meaning
Configuration message: The channels' hardware configuration has changed. This message
is issued following a channel installation/de-installation operation or after a hardware failure.
...I202 conf-file is corrupted '<Cname>'
Meaning
Software error: The configuration file <Cname> is corrupt.
...I702 cannot get/create semaphore - key: <key> CHPID range(s): <range> ...
Meaning
Software error/configuration error: The semaphore with the key <key> (eight characters)
cannot be read or cannot be generated. The semaphore has an invalid value or the access
rights have been set incorrectly.
...I703 cannot reserve semaphore - CHPID range(s): <range> ...
Meaning
Reservation error: The semaphore cannot be reserved because it is occupied by another
process. An attempt is made to identify the competing process (occupant) (for more infor-
mation, see
Response
It is necessary to wait until the other process has released the semaphore. In the case of
the cdebug program, close the current window and wait until the semaphore is released.
Then re-open the window.
...I704 cannot set semaphore - key: <key> CHPID range(s): <range> ...
Meaning
Software error/configuration error: The semaphore with the key <key> (eight characters)
cannot be initialized.
...I705 cannot release semaphore - key: <key> CHPID range(s): <range> ...
Meaning
Software error/configuration error: The semaphore with the key <key> (eight characters)
cannot be released.
366
section "Initialization script messages" on page
X2000 messages
379: Error message ..SS101).
U41272-J-Z385-3-76