Figure 121: Start Buttons In Primepower Serverview; Figure 122: "Tools" Tab In Primepower Serverview; Primepower Serverview Suite Application "Tools - Fujitsu Siemens Computers SX series User Manual

PRIMEPOWER ServerView Suite application "Tools"

11.3 PRIMEPOWER ServerView Suite application "Tools"
The functions "system disk mirror" (Mirror), "configuration data backup" (CSR) and "physical
system disk backup" (PSR) have been removed from the PRIMEPOWER ServerView Suite
application Bs2Devices for X2000 V2.5 and higher. They can now be found in the
independent PRIMEPOWER ServerView Suite application Tools which can be accessed by
selecting the "Tools" start button. The operation of these functions under the two locations
is identical.
System environment
Tools is supported on:
BS2000 partitions (SX servers with SMC).
SX server entry-level models.
Solaris systems (SMC, Solaris-Partition, Solaris-Server).
Incorporation in PRIMEPOWER ServerView
The application Tools can be called as a module in PRIMEPOWER ServerView Suite and
is started using the "Tools" start button:

Figure 121: Start buttons in PRIMEPOWER ServerView

Tools displays a "Tools" tab in which the statuses of the functions Mirror, CSR and PSR are
indicated:

Figure 122: "Tools" tab in PRIMEPOWER ServerView

The node name is given in the first column.
332
Solaris: system administration
U41272-J-Z385-3-76