Figure 60: Putty Configuration: Save; Using Exceed Via Secure Shell - Fujitsu Siemens Computers SX series User Manual

Remote operation via PC
Once you have completed the connection settings, you can save them in Category Session
with -> Save.

Figure 60: PuTTY Configuration: Save

6.3.3.2

Using Exceed via Secure Shell

1. Call Exceed to start the X server.
2. Call PuTTY and start the pre-configured connection to the server (double-click on the
entry for the connection required).
3. Depending on the PuTTY and SSH configurations the procedure will continue in one of
the following ways:
a) PuTTY opens a terminal emulation and requests the entry of a user ID
b) PuTTY opens a terminal emulation and requests the entry of a password
c) PuTTY opens the terminal emulation and requests the entry of a pass phrase
4. PuTTY starts the user interface on the server displaying the local X server.
U41272-J-Z385-3-76
(this will not occur if a user ID was previously configured in the Category Connection).
(this will not occur if an authentication key is being used and the key has been
accepted by sshd).
(this will not occur if no key is being used or if the key used is not protected by a
pass phrase).
Access with Secure Shell
151